P22358
Home > Morse Drum Handling > DRUM LIFT CARRIER - MANUAL TILT

DRUM LIFT CARRIER - MANUAL TILT

DRUM LIFT CARRIER - MANUAL TILT
  • Capacity: 800 Lbs
  • Steel 55 gallon drum
  • Fiber 55 gallon drum
  • Diameter adapters for smaller diameter drum
  • INCLUDES LOAD TEST CERTIFICATE

Use the Manual Tilt Drum Lift to lift, move and pour a drum within your reach below a hook on a hoist or crane. You manually control the tilt angle of the drum. Use the built-in tilt lock to hold the drum vertical for transporting, or in horizontal position to pour. They allow you to manually control drum tilting 360° in either direction. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place. These Drum-Karriers require that you manually grasp the drum to control the drum tilt. The drum can be locked in the vertical position for transporting, and locked in the horizontal position to pour. Release locks for hand controlled tilt at any angle. CUSTOM ORDERS ARE OUR SPECIALTY! Options: Stainless Steel Wash-down models available for food and Pharmaceutical applications. Spark Resistant Models Available for explosion proof controled environments.



Click here to see more Morse Drum Handling!

Prices and Availability Subject to Change

MANUAL TILT DRUM LIFT CARRIER
Product No. Description Capacity Wt. (lbs) Price Quantity
85A FOR 55-GALLON STEEL DRUM 800 Lb.(363 kg) 41
List Price: $562.50
TODAY: $506.25
85A-M SPARK RESISTANT FOR 55-GALLON STEEL DRUM 800 Lb.(363 kg) 41
TODAY: CALL!
In Stock
85C FOR FIBER DRUM or STEEL DRUM 21" - 23" DIAMETER 800 Lb.(363 kg) 41
List Price: $600.00
TODAY: $540.00
85I FOR 55-GALLON STEEL DRUM, ACCEPTS DIAMETER ADAPTORS FOR SMALLER DIAMETER DRUM 800 Lb.(363 kg) 43
List Price: $662.50
TODAY: $596.25
85I/E HAS FIBER DRUM STRAP AND ACCEPTS DIAMETER ADAPTORS FOR SMALLER DIAMETER DRUM 800 Lb.(363 kg) 45
List Price: $365.90
TODAY: $329.31
85I-SS TYPE 304 STAINLESS STEEL for 55-GALLON STEEL DRUM 800 Lb.(363 kg) 44
List Price: $2006.25
TODAY: $1805.62
These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
Rated load markings and unit identification Minimum design safety factor of 3, based on yield strength, for load bearing structural components
Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test
Manual Tilt Drum Lift Carrier

x

Thank you! Your request
has been submitted.

Check out items with

free shipping FREE SHIPPING

x

Thank you! Your request
has been submitted.

Check out items with

free shipping FREE SHIPPING