The Hydraulic Drum Dumper is what you need to dump drums that weigh up to 1,500 lbs. Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable units have two rigid and two swivel casters with floor lock screws. All steel construction.
Standard features inclued: 56 frame, 3/4 HP motor, 120V single phase, 60 Hz with an 8 foot long power cord and plug. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.
Hook 2, 4, 6, and 8 drum work stations with Link Locks to configure any shape spill platforms to meet your requirements. Tough polyethylene construction won¹t rust or corrode. Low profile 6" H. Not forkliftable. FOB Shipping Point.
Modular system organizes drum storage for maximum efficiency, productivity and cost savings. Handles either 30 or 55 gal. drums – Class IB or IC flammables and combustibles. UV protected polyethylene construction provides maximum chemical compatibility and resistance preventing corrosion and deterioration. Contains base, stack and dispensing shelf. Base handles 2 drums with a load capacity of 3000 lbs. Dispensing well conveniently holds either 5 gal. safety cans or 6 gal. pails. Complete with fork channels. Generous 66 gal. “open view” spill containment sump catches spills which are easy to spot and quickly cleaned up. The stack module doubles system capacity holding additional 2 drums – load capacity 1500 lbs. Dispensing shelf with a load capacity of 60 lbs. mounts securely to this module. Base module is EPA and UFC approved. FOB Shipping Point.
Poly-Racker™...one-piece polyethylene rack holds 2 - 55 gal. drums -- 100 gal. containment sump. Deep dispensing well holds 5 gal. pails. Forkliftable. Measures 52" x 49" x 23". FOB Shipping Point.
Poly-Stacker™...holds 2 - 55 gal. drums and can be stacked with a forklift. Holds up to 2400 lbs. of UDL weight. FOB Shipping Point.
Poly-Shelf™...easily attaches to Poly-Stackers™ and allows simultaneous dispensing from Stacker and Rack of drums. One piece molded polyethylene construction. FOB Shipping Point.
Can be stacked 2 high to hold up to 4-55 gal. drums. Spills fall into pallet for containment. 2400 lbs. load capacity. Eliminates the hassle of using drum pumps. 5-gallon pail sits on pallet for dispensing or the Poly Shelf can be added to the second level. 100% polyethylene construction canšt rust or corrode. Measures 48" x 41" x 20". FOB Shipping Point.
The ideal caddy for either 55 or 30 gal. drums – a double loop strap holds drum securely in place. Transport up to 600 lbs. loads easily and safely. Big, comfortable round handles. Rolls easily on 10” wheels. Oversized 66 gallon spill sump contains the chemical eliminating both the hazards and hassles of a spill. Exclusive “open view” sump design makes clean-up simple and quick. UV protected polyethylene construction provides maximum chemical compatibility. One piece body eliminates leaks. Complies with EPA, OSHA and UFC regulations. FOB Shipping Point.
Durable, low profile modular design offers the ability to create a custom system. Joining clips firmly lock units together and remove easily for repositioning. Sump-To-Sump™ Drain Kit allows for continuous sump to meet high sump capacity requirements. 6 and 8 drum units meet EPA, SPCC, NFPAI, and Int'l Fire Code. FOB Shipping Point.
Non-toxic, non-sparking and self-priming pumps 600 GPH materials in contact with food are Delrin, Buna-N, Silicone and Stainless Steel. FOB Shipping Point.
Polypropylene body is excellent for most acids and chemicals, especially where overfilling and underfilling might be dangerous. Prevents dripping with added 360° rotating spout safety feature. Pumps fit 3/4" and 2" bungs. FOB Shipping Point.
All pumps include 5' of discharge tubing. For use with acids, alkalies, chlorines, detergents, waxes, etc. Call for chemical compatibility. FOB Shipping Point.
It's tough Telfon piston and stainless steel suction tube delivers up to 16 oz. per stroke for efficient performance. Includes 2" IPS adapter for fitting, 15, 30 and 55 gallon drums. Also available in chrome plated steel, 16 oz. per stoke with a polyethylene piston. FOB Shipping Point.
PVC/PE Pump Economical and reliable. Delivers 8 oz. per stroke. Includes 22" polyethylene extension tube and PVC piston. For water and other nonflammable liquids with drip resistant spout. FOB Shipping Point.
PVC Pump Pumps 22 oz. per stroke for quick and efficient performance. All PVC constructed frame has 38" long pump body so no extension tube is needed. For water and other nonflammable liquids with drip resistant spout. FOB Shipping Point.
Durable and affordable. Ideal for use with high viscosity liquids. Features high angle discharge spout with screen and normal curved discharge spout. Telescoping tube. 2" bung adapter. Grounding bolt to ground pump. FOB Shipping Point.
Steel and aluminum, telescoping intake tube from 22" to 39". 3/4" inlet and outlet delivers approx. 1 gal. per ten strokes. Longwearing. FOB Shipping Point.
Air operated for use with motor oil, gear oil transmission fluid pumps up to 10 GPM. 1:1 pressure ratio between inlet and outlet. Comes with 2" bung adapter. FOB Shipping Point.
Stainless Steel Pump Ideally suited for acids and corrosive chemicals. 316 stainless steel piston construction with Teflon components for strengthened resistance. Dispenses 8 oz. per stroke. Includes 22" Teflon extension tube and plunger. Delrin bung adapter. Optional pail adapters. FOB Shipping Point.
Steel Pump Economical and durable pump for use with detergents and other liquids compatible with steel and polyethylene. Efficient 8 oz. per stroke. Comes with 22" polyethylene extension tube and piston. Optional pail adapters. FOB Shipping Point.
Empties 55 gal. drums in less than 2 minutes. Can run dry without pump damage. Seal-less -- eliminates the major cause of pump failure. New wide vane axial impeller efficiently moves high viscosity and specific gravity liquids. Large discharge. Large, easy-grip handle. Electric units feature on-off switch, circuit breaker and 15' cord. Air motors operate at 100 psi, 18 cfm with valve and muffler. Please specify chemical to be pumped, concentration, temperature and viscosity. FOB Shipping Point.
HP Series -- Polypropylene Tube with Hastelloy "C" Shaft. For use with acids, alkalis and chemicals such as hydrochloric acid and ferric chloride (130° F max.).
HH Series -- Kynar Tube & Hastelloy "C" Shaft. For use with non flammable organic solvents, freons, chlorine and alkalies (250° F max.)
Ideal for dispensing gasoline, diesel fuel, and similar petroleum products. Steel and aluminum comes with telescoping tube assembly. Delivers approx. 1 gal. per 8 strokes. FOB Shipping Point.
Sturdy hand crank delivers 6 GPM. Includes 1-1/4" x 40" long 3-piece O.D. stainless steel discharge set and 2" chemical resistant coated bung adapter. Viton lip seal and O-rings. FOB Shipping Point.
Returns drips and overflows through strainer back into drum. Rugged cast iron and steel construction. 3 piece suction tubes for use in a variety of drum sizes. 2" bung adapter included. FOB Shipping Point.
Series H07600 have built-in pressure and vacuum relief venting. Rotary style is ideal for non-corrosive chemicals, petroleum and general solvents. H07610, 8' hose and H07620, 6' hose have intergral bonding wire. H07630 has threaded spout and return tray. Piston style suitable for acetone and keotones. FOB Shipping Point.
Used for venting and filling drums. Save time, energy, labor, risk of spills and back injuries with the Tappo Drum Dispenser. Horizontal drum tap fits 2" drum opening. FOB Shipping Point.
6"L. brass flame arrestor screen prevents flashback ignition and hinged cover reduces the spread of hazardous vapors. Equipped with fusible link that melts at 165° to automatically close cover shut. Measures 10-3/4"dia. x 10"H. Mouth is 10-3/4". FOB Shipping Point.
Poly-Funnels...large capacity funnels allows multiple oil filters, cans and pails to drain at once. Big pouring area eliminates overspills and keeps drum heads clean. Ideal for automotive repair, transferring industrial cutting fluids, farm pesticides, laboratory reagents, etc. FOB Shipping Point.
Poly-Funnel 55...the original POLY-FUNNEL has a large pouring target and fits 30 and 55 gal. drums, steel or plastic.
Poly Safety-Funnel...comes complete with a flame arrestor for those flammable jobs.
Poly Funnel Plus...ideal for small head drums where pouring can be difficult.
Safety-Funnel Plus...with the tall sidewalls to protect against splashes and sloshes as well as a flame arrestor -- perfect for funneling flamable liquids.
Poly-Pail Funnel...for tight-head and open-head pails. Promotes active waste collection because pails may be safely carried between generation and collection points with the unit in place.
Poly Funnel Tall...the tall sidewalls will better handle splashes and messy sloshes. Added sidewall height allows T-Handle Stop to fit securely under the lid.
