LP1497
Werner Ladder
WERNER LADDER - A FRAME LADDER
EXTRA HEAVY DUTY FIBERGLASS STEPLADDER Features heavy gauge aluminum Tool-Tra-Top®. 4 solid 1/4" aluminum rivet attach top to each front and back rail. Back-up aluminum plate reinforces all top connectors. Heavy-duty 1-1/4" inside aluminum spreader bars. 3-1/4" extra wide Traction-Tred® deeply serrated aluminum steps, knee-braced and triple riveted. Full set of extra-strength knee-braced rear horizontals spaced one per foot. Lower rails reinforced with attached black non-conductive fiberglass rail shields to resist abuse. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Front rails 3-3/8"W. Flange 1-3/16"W. Rear Rails 2"W. Flange 1-7/8"W. Steps are 3-1/4"W. Top is 7-1/4"W x 14"L. Meets ANSI and OSHA Standards. FOB Shipping Point. |
HEAVY DUTY ALUMINUM STEPLADDER Unique "H" spreaders with hand grip on 4', 5' and 6' units. Pinch-Proof™ outside spreaders on 3', 8' and 10' units. Blue, molded vinyl foot pads are riveted to aluminum foot brackets. UL Listed and Labeled. Meets ANSI and OSHA Code. FOB Shipping Point. |
EXTRA HEAVY DUTY FIBERGLASS STEPLADDER Structural molded copolymer Tool-Tra-Top® holds quart paint cans and tools -- slotted for paint roller tray. Handy bucket holder clip. Internal steel spreaders protect against abuse, storage and transport damage. Double-riveted aluminum steps are deeply serrated for slip resistance. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Front rails 3-1/8"W. Flange 1-3/16"W. Rear Rails 1-7/8"W. Flange 1-3/16"W. Steps are 3"W. Top is 5-3/4"W x 13"L. Meets ANSI and OSHA Standards. FOB Shipping Point. |
(back to top) WERNER LADDER - EXTENSION LADDER
FIBERGLASS FLAT D-RUNG EXTENSION LADDER Traction-Tred® 1-1/2"W deeply serrated aluminum flat D-rung. Interlocking side rails. Internal guides on bottom of fly section and external guides on top of base section. Combination aluminum rail shield bracket and shoe with extruded rubber slip-resistant shoe pad and spur plate. Twist-Proof® due to exclusive Alflo® rung joints. Pre-pierced holes at top of fly for field installation of accessories. For ladders 16'-28' rails are 3-5/16", flange 1-3/16', and D-rungs 1-1/2". Fly section width: 16" outside rail, 13-5/8" inside rail. Base section 17-3/4" outside rail, 19" outside shoe. For ladders 32' and 40' rails are 3-5/16", flange 1- 3/16" and D-rungs 1-1/2". Fly section 16" outside rail, 13-5/8" inside rail. Base section 17-3/4" outside rail, 19" inside rail. Meets ANSI and OSHA Standards. FOB Shipping Point. |
ALUMINUM FLAT D-RUNG EXTENSION LADDERS Mar-resistant molded black end caps and vinyl fly section shoes. Larger, stronger modified "I" beam side rails. Exclusive continuous rope and quick clip eliminates loose ends, knots and tangles. Large, smoothly operating extruded gravity/spring locks with spring activated nylon flipper. Full side rail 1/4" thick guide bracket at top of base, engages full fly rail. Guide brackets at bottom inside fly section for smooth operation and durability. Shu-Lok™ features hold shoes in spur position for penetrating grass, dirt, etc. 16-40' ladders; side rails 3"W, flange 1-1/8"W, D-rungs 1-3/4", base width 18" outside rails. UL Listed and Labeled. Meets OSHA and ANSI Code. FOB Shipping Point. |
EXTRA HEAVY DUTY FIBERGLASS FLAT D-RUNG EXTENSION LADDER Traction-Tred® 1-3/4"W deeply serrated aluminum flat D-rung. Polyethylene rung wear sleeves. Combination aluminum rail end shield and shoe with extruded rubber slip-resistant shoe pad and steel spur plate. Twist-Proof® due to exclusive Alflo® rung joints. Pre-pierced holes at top of fly for field installation of accessories. For ladders 40' rails are 4", flange 1-3/4", and flat type D-rungs 1-3/4". Fly section width for 40' ladders: 16-3/4" outside rail, 13-1/4" inside rail. Base section for 40' ladders 20-7/8" outside rail, 22" outside shoes. Meets ANSI and OSHA Standards. FOB Shipping Point. |