CH-55 - Plastic Drum - Closed Head

Special Notes 30 Gallon:

1) Maximum filling temperature ~160°F. When filled at this maximum temperature drum should be allowed to cool to ambient prior to stacking. Drums filled at elevated temperatures should be vented properly to prevent vacuum formation within the drum.

2) Nonvented drums may be stacked 4 high (1+3) maximum with pallets between drums, maximum top load on bottom drums not to exceed 1500 lbs each. Vented drums may be stacked 3 high (1+2) maximum with pallets between drums, maximum top load on bottom drums not to exceed 700 lbs each. Pallets should be of good quality that provides adequate support for plastic drums.

3) Handle with parrotbeak, side grabber, and sling.

4) Available with or without weepholes (no weepholes standard).

5) Recycle symbol embossed on bottom.

6) Compatibility with hazardous materials as listed in 49CFR are the responsibility of the filler.

Special Notes 55 Gallon:

1) Maximum filling temperature 150 F for all foods and other FDA regulated substances. 160 F for all non-foods and other substances that are not regulated by FDA. When filled at these recommended maximum filling temperatures drums should be allowed to cool to ambient prior to stacking. Drums filled at elevated temperatures should be vented properly to prevent vacuum formation within the drum which can compromise stacking capability.

2) Drums may be stacked 3 high (1+2) maximum with pallets between drums. For nonvented drums, maximum top load on bottom drums not to exceed 2000 lbs each. For vented drums, maximum top load on bottom drums not to exceed 1400 lbs each. Pallets should be of good quality that provides adequate support for plastic drums.

3) Handle with parrotbeak, side grabber, and sling.

4) Fits four wide in standard trailer.

5) Recycle symbol embossed on bottom.

6) Compatibility with hazardous materials as listed in 49CFR are the responsibility of the filler.

7) Test Report P105, drum is manufactured at 22.5 lbs. Lockport.

8) Test Report P152, drum is manufactured with 100% in-process regrind available from Mt. Sterling.