Drum Rotators

Compact portable industrial drum mixer and drain stand rolls a closed drum on its side to agitate the contents. Utilize important ingredients that would otherwise be in unmixed sediment. Built-in retractable tipping lever to assist loading. Also use as drain stand to dispense from drum. AC Motor is 1/2 HP 60 Hz. Capacity 500 lbs. liquid load and up to 400 lbs. dry load. FOB Shipping Point.<BR><BR><STRONG><EM>Benefits of mixing in closed shipping drums....</EM></STRONG><UL><LI><STRONG>Remix settled ingredients</STRONG></LI><LI><STRONG>Eliminate transfer, clean-up and special vessels.</STRONG></LI><LI><STRONG>No conatainer to purge between batches.</STRONG></LI><LI><STRONG>Nothing to insert into drum mix.</STRONG></LI></UL>

Save time, labor and money by mixing in closed shipping drums. Eliminate transfer, clean-up and specialcontainers. End-over-end tumbling action does a thorough mixing job to insure homogeneity. Mix dry powders, wet grains, dyes and coloring liquids, fine and coarse granules, settled liquids and powders. Ideal formixing highly viscous substances.The sturdy frame resists the stress and shock of tumbling. It has a heavy structural steel base, a 1.5 shaft, and ball bearings. Non-explosion proof AC models include a prewired control box with start, stop and jog functions. Explosion proof models also include a control box, but require an electrician to wire according to your local codes.End-Over-End Rotators are made to handle a 55-gallon steel drum. To assist in loading a drum, a MorseDrum Lifting Hook is included. Attach the Lifting Hook to an overhead hoist, engage the hooks onto the top and bottom chines of the drum, and lift the drum into the holder. Place the chains of the drum holder around the drum and lock securely with two load binders. The ends of the chains are then placed around the load binder handles and fastened with a safety snap to prevent unintentional opening.Single Drum Rotators: Rotate one 55-gallon steel drum end-over-end. 1 HP motor. Base dimensions: 30" x 54"Double Drum Rotators: Rotate two 55-gallon steel drums simultaneously. Drum holders rotate on the same axis but are 90 degrees out of phase with each other. 1.5 HP motor. Base dimensions: 30" x 88"CUSTOM ORDERS ARE OUR SPECIALTY!NOTE: OSHA requires that ALL rotators to have enclosure with drive mechanism, so drum cannot revolve unless guard is in place.Options: Load Crane: The Load Crane assists in loading a drum into the tumbler for those without a hoist over the machine. Load Crane for self-contained loading capability has a short piece of alloy lifting-chain with a connector to attach the Drum Lifting Hook. The Load Crane uses the Drum Lifting Hook to engage a horizontal drum. The lifting range and pivot travel of the Load Crane enables lifting a horizontal drum from floor in front of the drum tumbler up to and into one drum-holder of the drum tumbler, and back again.Cage With Safety InterlockInstall Morse drum rotators in accordance with OSHA requirements for enclosure and interlock, etc.For OSHA compliance, see OSHA subpart O.1910.212 "General Requirements for all Machines." Power connections and motor controls must comply with applicable codes.

Rotate drum to mix or blend material inside a closed drum. Mix the contents of a sealed drum to ensure homogeneity with less hazards.Roll 6" to 28" diameter drum on its side. Set your drum onto the rotator wheels and roll it to mix the contents. Models to roll one ortwo drums at a time. Choose factory set drum speed of 10, 20 or 30 RPM. The 20 RPM speed is good for most liquids and is furnished if RPM is not specified. Or choose Variable Speed (VS) models to rotate drum at 10 to 40 RPM. Capacity: Liquid load: 1000 Lb. per drum. Dry load varies: 400 Lb. at 10 RPM, 300 Lb. at 20 RPM, 250 Lb. at 30 RPM.Single Drum Rollers - roll a single drum up to 40" long. Motor: 1/2 HP, 60Hz. Base dimensions: 24? x 55".Double Drum Rollers - roll one or two drums up to 36" long. Motor: 1 HP, 60Hz. Base dimensions: 24? x 94".NOTE: OSHA requires that ALL rotators to have enclosure with drive mechanism, so drum cannot revolve unless guard is in place.Options: Roll a 1 to 5 gallon pail with idler attachment part # 1-5-1. Easily removed for rolling a drum. Roll a plastic drum with Option# POLY-1-5154 for single drum rollers, or Option # POLY-2-5154 for double drum rollers.Cage With Safety InterlockInstall Morse drum rotators in accordance with OSHA requirements for enclosure and interlock, etc.For OSHA compliance, see OSHA subpart O.1910.212 "General Requirements for all Machines." Power connections and motor controls must comply with applicable codes.

<P>Hydra-Lift Drum Rotators accept steel drum in upright position and control the built-in hydraulic system to lift drum and place it quickly and easily for rotation. Start and stop rotation with a second control. Enjoy the benefits of easy, ergonomic loading and unloading and eliminate the hazards of manual drum handling. Roll drum at 5 to 20 RPM until contents are mixed as desired, then return to vertical to unload. FOB Shipping Point.<BR><BR><B>Specifications...</B><BR>Rotate steel drums 6" to 26" dia., max. 40" length. AC Motor is 1 HP 60 Hz. Capacity 1000 lbs. liquid load, 400 lbs. dry load. A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.<BR><BR><STRONG><EM>Benefits of mixing in closed shipping drums....</EM></STRONG></P><UL><LI><STRONG>Remix settled ingredients</STRONG></LI><LI><STRONG>Eliminate transfer, clean-up and special vessels.</STRONG></LI><LI><STRONG>No conatainer to purge between batches.</STRONG></LI><LI><STRONG>Nothing to insert into drum mix.</STRONG></LI></UL>

<P>Tilt-To-Load Drum Rotators tumble your closed drums with "vigorous "corner-over-corner" action to thoroughly mix the contents. Load drum at floor level. Secure drum in holder, then use one handle to lift drums and a second handle to control the drum rotation. FOB Shipping Point.<BR><BR><B>Specifications...</B><BR>Rotate steel, plastic or fiber drum 29" to 37"H., 18" to 23.5" dia. Drum rotation is variable from 5 to 20 RPM. AC Motor is 2 HP 60 Hz. Capacity 800 lbs. for a full drum, 400 lbs. for a half-full drum. Half-full capacity is for tilting an unbalanced, bottom-heavy drum. A drum with an unbalanced or shifting load is harder to tilt than a full drum.<BR><BR><STRONG><EM>Benefits of mixing in closed shipping drums....</EM></STRONG></P><UL><LI><STRONG>Remix settled ingredients</STRONG></LI><LI><STRONG>Eliminate transfer, clean-up and special vessels.</STRONG></LI><LI><STRONG>No conatainer to purge between batches.</STRONG></LI><LI><STRONG>Nothing to insert into drum mix.</STRONG></LI></UL>